For years there seemed to be only one trustworthy solution to store data on a laptop – employing a hard disk drive (HDD). However, this sort of technology is already displaying it’s age – hard drives are noisy and sluggish; they can be power–ravenous and frequently produce lots of warmth in the course of serious procedures.

SSD drives, alternatively, are swift, use up a smaller amount energy and are much cooler. They feature a whole new method of file access and storage and are years ahead of HDDs in terms of file read/write speed, I/O operation and then power effectivity. Observe how HDDs stand up against the more recent SSD drives.

1. Access Time

With the launch of SSD drives, data access speeds are now over the top. On account of the completely new electronic interfaces found in SSD drives, the typical file access time has shrunk to a record low of 0.1millisecond.

HDD drives even now make use of the exact same fundamental data file access concept which was initially created in the 1950s. Though it was substantially improved ever since, it’s slower in comparison with what SSDs will offer. HDD drives’ file access rate ranges somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

As a result of exact same revolutionary method which allows for speedier access times, also you can benefit from better I/O performance with SSD drives. They are able to perform double as many procedures during a given time when compared to an HDD drive.

An SSD can handle a minimum of 6000 IO’s per second.

All through the very same tests, the HDD drives demonstrated that they are significantly slower, with only 400 IO operations handled per second. Although this may appear to be a good deal, for people with an overloaded web server that hosts plenty of well–liked web sites, a sluggish disk drive can result in slow–loading websites.

3. Reliability

The lack of moving components and rotating disks inside SSD drives, as well as the recent improvements in electric interface technology have ended in a much risk–free file storage device, having an typical failing rate of 0.5%.

HDD drives employ spinning hard disks for saving and browsing info – a technology dating back to the 1950s. And with disks magnetically suspended in mid–air, rotating at 7200 rpm, the prospects of anything going wrong are considerably increased.

The standard rate of failure of HDD drives can vary between 2% and 5%.

4. Energy Conservation

SSDs do not have moving elements and need little or no cooling energy. In addition, they demand not much electricity to operate – trials have revealed they can be powered by a regular AA battery.

As a whole, SSDs use up between 2 and 5 watts.

HDD drives can be renowned for becoming loud; they can be at risk of getting too hot and whenever there are several disk drives in a single hosting server, you’ll want a different a / c device simply for them.

In general, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

The speedier the data accessibility rate is, the swifter the data file demands can be treated. It means that the CPU do not need to hold resources waiting for the SSD to reply back.

The standard I/O delay for SSD drives is barely 1%.

When using an HDD, you will need to spend extra time watching for the outcome of one’s data request. It means that the CPU will be idle for more time, expecting the HDD to reply.

The standard I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

The majority of our completely new servers moved to only SSD drives. Our personal lab tests have demonstrated that with an SSD, the common service time for an I/O request whilst building a backup stays under 20 ms.

During the very same lab tests with the exact same server, this time installed out with HDDs, functionality was much slow. All through the server back up process, the normal service time for any I/O requests fluctuated between 400 and 500 ms.

7. Backup Rates

Talking about back–ups and SSDs – we’ve witnessed a significant development in the back up rate as we switched to SSDs. Currently, a normal hosting server back up will take just 6 hours.

Over time, we have used predominantly HDD drives with our machines and we are knowledgeable of their effectiveness. On a server pre–loaded with HDD drives, a complete server backup will take about 20 to 24 hours.

The VPS plans along with our routine shared hosting plans accounts feature SSD drives by default. Join our WEBterranean family, to check out the way we can help you improve your website.


  • Service guarantees

  •  
  • All of our Virtual Private Servers provide no installation rates and function in a secure network providing 99.9% of uptime. Full root server access warranted.
  • Compare our prices

  •  
  • Examine the tools and features coming with WEBterranean’s Virtual Private Servers. You can begin with a smaller VPS server and move up with simply a mouse click as your necessities increase.
  • Compare our hosting plans
  • Contact Us

  •  
  • We’re available for you 24 hours to resolve any kind of inquiries in relation to our VPS solutions. 1–hour reply time warranty.